|
Click on small images to enlarge
|
| Reference Number | 4917
|
| Vessel Type | Liners - Bottom & Surface, Miscellaneous Vessels, Troller, Work Boat
|
| Built By | Wanganui Steel Boats
|
| Year Built | 1969
|
| LOA | 16 m
|
| Length Reg | 15 m
|
| Beam | 4.4 m
|
| Draft | 2.3 m
|
| GRT | 41.9 T
|
| Construction | Steel
|
| Construction Details | Full shelter deck.
Covered deck area approximately 20 square metres
|
| General Description | MULTI PURPOSE FISHING VESSEL/WORKBOAT. EX TUNA TROLLER AND BOTTOM AND SURFACE LINER. ****** KEEN SELLER ******
|
| Engine | Gardner
|
| Engine Details | 6L3B
Re-built engine installed 2010
Estimate 4,000 - 5,000 hours since installation.
Estimated 200 hours of that was trawling.
Hydraulic motor belt driven off front of engine.
|
| Horsepower | 170 hp
|
| Electrical | 24V alternator
|
| Gearbox | Twin Disc 3:1 with trolling valve fully rebuilt 2010
. Has PTO
|
| Propeller | 41" x 38" 3 blade Kort nozzle
|
| Shaft Size | 3.5 inches
|
| Fuel Capacity | 2400L in 2 tanks
|
| Water Capacity | 300 litres 1 tank
|
| Max Speed | 8 knots
|
| Fuel Consumption | 12-13 LPH
|
| Wheel House | Forward
|
| Hold | 10 T
|
| Hold Type | Ice
|
| Hold/Fishroom | 172 x 40kg bins
|
| Accommodation | Berths 4
|
| Galley | Gas stove
|
| Facilities | Flush Toilet,
Shower
gas hot water
|
| Line Hauler | Line hauler
|
| Gear | Albacore poles
|
| Cargo Winch | Gilson over hatch
|
| Anchor | Hydraulic winch
100m chain
Danforth
Admiralty
|
| Radio | SSB new 2012
Uniden VHF
|
| Radar | Koden 24 mile new 2010
|
| G.P.S. | Furuno 1500 GPS/Plotter
|
| Plotter | Navman program available to install on computer
|
| Sounders | Koden
|
| Auto Pilot | TMQ
|
| Other | TV
Video
|
| Survey Class | MOSS - NZ Coastal Fishing 100 miles
New 5 year survey completed March 2015.
Valid to 7 March 2020 - subject to periodic inspections.
|
| Vessels History | Hull slipped, tested and repaired under supervision of surveyor.
Built as a trawler. Later used for long lining and trolling. Top catching Albacore vessel 2012.
|
| General | RECENT HULL WORK.
WOULD MAKE A GOOD WORK BOAT OR GO BACK FISHING.
OWNER ASKS FOR OFFERS TO BE PUT FORWARD FOR CONSIDERATION
|
| SPECIAL | PRICE REDUCED
|
| Price | NZ$ 40,000.00
Plus GST and /or Taxes if any.
|
|
Plus GST and /or Taxes if any. All information is provided in good faith and is accurate to the best of our knowledge AT DATE OF LISTING. Buyers should verify information, by inspection, prior to purchase. We accept no responsibility for errors.
|
